Related Articles
An axis-specific mitral annuloplasty ring eliminates mitral regurgitation allowing mitral annular motion in an ovine model
Current mitral annuloplasty rings fail to restrict the anteroposterior distance while allowing dynamic mitral annular changes. We designed and manufactured a mitral annuloplasty ring that demonstrated axis-specific, selective flexibility to meet this clinical need. The objectives were to evaluate ex vivo biomechanics of this ring and to validate the annular dynamics and safety after ring implantation in vivo.
3D printing of micro-nano devices and their applications
In recent years, the utilization of 3D printing technology in micro and nano device manufacturing has garnered significant attention. Advancements in 3D printing have enabled achieving sub-micron level precision. Unlike conventional micro-machining techniques, 3D printing offers versatility in material selection, such as polymers. 3D printing technology has been gradually applied to the general field of microelectronic devices such as sensors, actuators and flexible electronics due to its adaptability and efficacy in microgeometric design and manufacturing processes. Furthermore, 3D printing technology has also been instrumental in the fabrication of microfluidic devices, both through direct and indirect processes. This paper provides an overview of the evolving landscape of 3D printing technology, delineating the essential materials and processes involved in fabricating microelectronic and microfluidic devices in recent times. Additionally, it synthesizes the diverse applications of these technologies across different domains.
Personalized bioceramic grafts for craniomaxillofacial bone regeneration
The reconstruction of craniomaxillofacial bone defects remains clinically challenging. To date, autogenous grafts are considered the gold standard but present critical drawbacks. These shortcomings have driven recent research on craniomaxillofacial bone reconstruction to focus on synthetic grafts with distinct materials and fabrication techniques. Among the various fabrication methods, additive manufacturing (AM) has shown significant clinical potential. AM technologies build three-dimensional (3D) objects with personalized geometry customizable from a computer-aided design. These layer-by-layer 3D biomaterial structures can support bone formation by guiding cell migration/proliferation, osteogenesis, and angiogenesis. Additionally, these structures can be engineered to degrade concomitantly with the new bone tissue formation, making them ideal as synthetic grafts. This review delves into the key advances of bioceramic grafts/scaffolds obtained by 3D printing for personalized craniomaxillofacial bone reconstruction. In this regard, clinically relevant topics such as ceramic-based biomaterials, graft/scaffold characteristics (macro/micro-features), material extrusion-based 3D printing, and the step-by-step workflow to engineer personalized bioceramic grafts are discussed. Importantly, in vitro models are highlighted in conjunction with a thorough examination of the signaling pathways reported when investigating these bioceramics and their effect on cellular response/behavior. Lastly, we summarize the clinical potential and translation opportunities of personalized bioceramics for craniomaxillofacial bone regeneration.
Printable graphene inks with polypropylene carbonate for low-surface-tension solvents and mild-temperature post-processing
For dispersion stability, printable graphene inks commonly employ solvents with limited surface tensions or incorporate dispersant aids that require high-temperature post-processing, restricting printability and substrate compatibility. Here, printable graphene inks are introduced with low-surface-tension solvents and mild-temperature post-processing using polypropylene carbonate (PPC). Graphene is produced by liquid-phase exfoliation with PPC, and the exfoliated graphene/PPC is used to generate printable inks. As a dispersant aid, PPC improves graphene exfoliation, dispersion stability, and redispersability in solvents with low surface tensions (<30 mJ m–2), facilitating the formulation of desirable inks for efficient aerosol jet printing on diverse substrates. Moreover, the low decomposition temperature of PPC eases its thermal removal from printed graphene, allowing high electrical conductivity with a mild post-processing temperature of 220 °C. Consequently, the graphene inks enable the fabrication of fully-printed graphene micro-supercapacitors on heat-sensitive paper substrates, exhibiting high areal capacitances, cycling stability, and mechanical resilience against bending deformation.
Cryo-EM structure of PML RBCC dimer reveals CC-mediated octopus-like nuclear body assembly mechanism
Promyelocytic leukemia protein (PML) nuclear bodies (NBs) are essential in regulating tumor suppression, antiviral response, inflammation, metabolism, aging, and other important life processes. The re-assembly of PML NBs might lead to an ~100% cure of acute promyelocytic leukemia. However, until now, the molecular mechanism underpinning PML NB biogenesis remains elusive due to the lack of structural information. In this study, we present the cryo-electron microscopy (cryo-EM) structure of the PML dimer at an overall resolution of 5.3 Å, encompassing the RING, B-box1/2 and part of the coiled-coil (RBCC) domains. The integrated approach, combining crosslinking and mass spectrometry (XL-MS) and functional analyses, enabled us to observe a unique folding event within the RBCC domains. The RING and B-box1/2 domains fold around the α3 helix, and the α6 helix serves as a pivotal interface for PML dimerization. More importantly, further characterizations of the cryo-EM structure in conjugation with AlphaFold2 prediction, XL-MS, and NB formation assays, help unveil an unprecedented octopus-like mechanism in NB assembly, wherein each CC helix of a PML dimer (PML dimer A) interacts with a CC helix from a neighboring PML dimer (PML dimer B) in an anti-parallel configuration, ultimately leading to the formation of a 2 µm membrane-less subcellular organelle.
Responses