Boron-selective electrosorption with functionalized electrodes
Related Articles
Advanced electrode processing for lithium-ion battery manufacturing
Lithium-ion batteries (LIBs) need to be manufactured at speed and scale for their use in electric vehicles and devices. However, LIB electrode manufacturing via conventional wet slurry processing is energy-intensive and costly, challenging the goal to achieve sustainable, affordable and facile manufacturing of high-performance LIBs. In this Review, we discuss advanced electrode processing routes (dry processing, radiation curing processing, advanced wet processing and 3D-printing processing) that could reduce energy usage and material waste. Maxwell-type dry processing is a scalable alternative to conventional processing and has relatively low manufacturing cost and energy consumption. Radiation curing processing could enable high-throughput manufacturing, but binder selection is limited to certain radiation curable chemistries. 3D-printing processing can produce electrodes with diverse architectures and improved rate performance, but scalability is yet to be demonstrated. 3D-printing processing is good for special applications where throughput and cost can be compromised for performance.
Biomolecule sensors based on organic electrochemical transistors
Biosensors based on organic electrochemical transistors (OECTs) have been a research highlight in recent years owing to their remarkable biocompatibility, low operating voltage, and substantial signal amplification capability. Especially, as an emerging fundamental device for biosensing, OECTs show great potential for pH, ions, molecules, and biomarker sensing. This review highlights the research progress of biomolecule sensors based on OECTs, focusing on recent publications in the past 5 years. Specifically, OECT-based biomolecule sensors for small molecules (glucose, dopamine, lactate, etc. that act as signals or effectors), and macromolecules (DNA, RNA, proteins, etc. that are often used as markers in physiology and medicine), are summarized. Additionally, emerging technologies and materials used to enhance sensitivity, detection limits, and detection ranges are described comprehensively. Last, aspects of OECT-based biomolecule sensors that need further improvement are discussed along with future opportunities and challenges.
Memristors based on two-dimensional h-BN materials: synthesis, mechanism, optimization and application
Memristors offer vast application opportunities in storage, logic devices, and computation due to their nonvolatility, low power consumption, and fast operational speeds. Two-dimensional materials, characterized by their novel mechanisms, ultra-thin channels, high mechanical flexibility, and superior electrical properties, demonstrate immense potential in the domain of high-density, fast, and energy-efficient memristors. Hexagonal boron nitride (h-BN), as a new two-dimensional material, has the characteristics of high thermal conductivity, flexibility, and low power consumption, and has a significant application prospect in the field of memristor. In this paper, the recent research progress of the h-BN memristor is reviewed from the aspects of device fabrication, resistance mechanism, and application prospect.
A comprehensive review of KCC-1 fibrous silica for water treatment
The growing global demand for freshwater necessitates advanced water treatment technologies. This review highlights the application of fibrous silica spheres, KCC-1, in water remediation, focusing on the removal of heavy metals and organic dyes. KCC-1’s unique fibrous morphology, high surface area, and physicochemical properties make it a promising adsorbent. This work examines its synthesis, modifications, and advantages, providing insights into optimizing KCC-1-based adsorbents for sustainable water treatment.
Infiltration-driven performance enhancement of poly-crystalline cathodes in all-solid-state batteries
All-solid-state batteries (ASSBs) with adequately selected cathode materials exhibit a higher energy density and better safety than conventional lithium-ion batteries (LIBs). Ni-rich layered cathodes are benchmark materials for traditional LIBs owing to their high energy density. Recent studies have highlighted the advantages of using crack-free, single-crystalline cathode materials in ASSBs. In this study, a scalable infiltration sheet-type process was used to fabricate composite electrodes with different cathode-material morphologies for ASSBs. Typically, crack-free single-crystalline materials exhibit better retention performance and lower rate capability (i.e., slower kinetics in charge‒discharge processes) than polycrystalline cathode materials. Li6PS5Cl-infiltrated polycrystalline electrodes showed excellent retention performance and rate capability. Galvanostatic intermittent titration technique analysis and transmission electron microscopy of the single-crystalline electrode confirmed severe polarization and the presence of a rock-salt-structure layer in the cathode particles; these results indicated side reactions within the layered structure of the material. In contrast, composite electrodes consisting of polycrystalline cathode materials infiltrated with the solid electrolyte Li6PS5Cl showed excellent electrochemical performance owing to intimate electrode–electrolyte interfacial contact. The result from this study confirmed the critical influence of interface engineering and material morphology on the overall performance and stability of ASSBs and could facilitate the development of high-performance ASSBs in the future.
Responses