Related Articles

Carbon-coating effect on the performance of photolithographically-structured Si nanowires for lithium-ion microbattery anodes

The applications of three-dimensional Si nanowire anodes in lithium-ion microbatteries have attracted great interest in the realization of high-capacity and integrated energy storage devices for microelectronics. Combining Si nanowires with carbon can improve the anode performance by aiding its mechanical stability during cycling. Here, we incorporate photolithography, cryogenic dry etching, and thermal evaporation as the commonly used methods in semiconductor technologies to fabricate carbon-coated Si nanowire anodes. The addition of amorphous carbon to Si nanowire anodes has an impact on increasing the initial areal capacity. However, a gradual decrease to 0.3 mAh cm−2 at the 100th cycle can be observed. The post-mortem analyses reveal different morphologies of Si nanowire anodes after cycling. It is indicated that carbon coating can help Si nanowires to suppress their volume expansion and reduce the excessively produced amorphous Si granules found in pristine Si nanowire anodes.

Scanning vortex microscopy reveals thickness-dependent pinning nano-network in superconducting niobium films

The presence of quantum vortices determines the electromagnetic response of superconducting materials and devices. Controlling the motion of vortices and their pinning on intrinsic and artificial defects is therefore essential for further development of superconducting electronics. Here we take advantage of the attractive force between a magnetic tip of the Magnetic Force Microscope and a single quantum vortex to spatially map the pinning force inside 50–240 nm thick magnetron-sputtered niobium films, widely used in various applications. The revealed pinning nanonetwork is related to the thickness-dependent granular structure of the films as well as to the characteristic microscopic scales of superconductivity. Our approach is general and can be directly applied to other type-II granular superconducting materials and nanodevices.

Absence of diode effect in chiral type-I superconductor NbGe2

Symmetry elegantly governs the fundamental properties and derived functionalities of condensed matter. For instance, realizing the superconducting diode effect (SDE) demands breaking space-inversion and time-reversal symmetries simultaneously. Although the SDE is widely observed in various platforms, its underlying mechanism remains debated, particularly regarding the role of vortices. Here, we systematically investigate the nonreciprocal transport in the chiral type-I superconductor NbGe2. Moreover, we induce type-II superconductivity with elevated superconducting critical temperature on the artificial surface by focused ion beam irradiation, enabling control over vortex dynamics in NbGe2 devices. Strikingly, we observe negligible diode efficiency (Q < 2%) at low magnetic fields, which rises significantly to Q ~ 50% at high magnetic fields, coinciding with an abrupt increase in vortex creep rate when the superconductivity of NbGe2 bulk is suppressed. These results unambiguously highlight the critical role of vortex dynamics in the SDE, in addition to the established symmetry rules.

A hybrid single quantum dot coupled cavity on a CMOS-compatible SiC photonic chip for Purcell-enhanced deterministic single-photon emission

The ability to control nonclassical light emission from a single quantum emitter by an integrated cavity may unleash new perspectives for integrated photonic quantum applications. However, coupling a single quantum emitter to cavity within photonic circuitry towards creation of the Purcell-enhanced single-photon emission is elusive due to the complexity of integrating active devices in low-loss photonic circuits. Here we demonstrate a hybrid micro-ring resonator (HMRR) coupled with self-assembled quantum dots (QDs) for cavity-enhanced deterministic single-photon emission. The HMRR cavity supports whispering-gallery modes with quality factors up to 7.8×103. By further introducing a micro-heater, we show that the photon emission of QDs can be locally and dynamically tuned over one free spectral ranges of the HMRR ( ~ 4 nm). This allows precise tuning of individual QDs in resonance with the cavity modes, thereby enhancing single-photon emission with a Purcell factor of about 4.9. Our results on the hybrid integrated cavities coupled with two-level quantum emitters emerge as promising devices for chip-based scalable photonic quantum applications.

Spin polarised quantised transport via one-dimensional nanowire-graphene contacts

Graphene spintronics offers a promising route to achieve low power 2D electronics for next generation classical and quantum computation. As device length scales are reduced to the limit of the electron mean free path, the transport mechanism crosses over to the ballistic regime. However, ballistic transport has yet to be shown in a graphene spintronic device, a necessary step towards realising ballistic spintronics. Here, we report ballistic injection of spin polarised carriers via one-dimensional contacts between magnetic nanowires and a high mobility graphene channel. The nanowire-graphene interface defines an effective constriction that confines charge carriers over a length scale smaller than that of their mean free path. This is evidenced by the observation of quantised conductance through the contacts with no applied magnetic field and a transition into the quantum Hall regime with increasing field strength. These effects occur in the absence of any constriction in the graphene itself and occur across several devices with transmission probability in the range T = 0.08 − 0.30.

Responses

Your email address will not be published. Required fields are marked *