Related Articles

Measuring age-dependent viscoelasticity of organelles, cells and organisms with time-shared optical tweezer microrheology

Quantifying the mechanical response of the biological milieu (such as the cell’s interior) and complex fluids (such as biomolecular condensates) would enable a better understanding of cellular differentiation and aging and accelerate drug discovery. Here we present time-shared optical tweezer microrheology to determine the frequency- and age-dependent viscoelastic properties of biological materials. Our approach involves splitting a single laser beam into two near-instantaneous time-shared optical traps to carry out simultaneous force and displacement measurements and quantify the mechanical properties ranging from millipascals to kilopascals across five decades of frequency. To create a practical and robust nanorheometer, we leverage both numerical and analytical models to analyse typical deviations from the ideal behaviour and offer solutions to account for these discrepancies. We demonstrate the versatility of the technique by measuring the liquid–solid phase transitions of MEC-2 stomatin and CPEB4 biomolecular condensates, and quantify the complex viscoelastic properties of intracellular compartments of zebrafish progenitor cells. In Caenorhabditis elegans, we uncover how mutations in the nuclear envelope proteins LMN-1 lamin A, EMR-1 emerin and LEM-2 LEMD2, which cause premature aging disorders in humans, soften the cytosol of intestinal cells during organismal age. We demonstrate that time-shared optical tweezer microrheology offers the rapid phenotyping of material properties inside cells and protein blends, which can be used for biomedical and drug-screening applications.

Genesis and timing of KREEP-free lunar Mg-suite magmatism indicated by the first norite meteorite Arguin 002

There is ongoing debate about whether lunar magnesian suite (Mg-suite) magmatism was a global, nearly synchronous event with a genetic link to potassium, rare-earth element and phosphorus components (KREEP). Arguin 002, the first whole-rock meteorite classified as a lunar norite, offers a unique opportunity to explore the genesis and timing of Mg-suite rocks. Here we investigated the petrology, mineralogy, geochemistry, and chronology of Arguin 002, revealing it to be an evolved, KREEP-free Mg-suite rock with chemical similarities to atypical Apollo-15 Fe-norites. It likely formed through plutonic magmatism originating from low-degree partial melting of a deep, KREEP-free mantle source and has a 207Pb/206Pb age of 4341.5  ± 9.3 Ma. The potential source of Arguin 002 is within the South Pole-Aitken basin, near the Chang’e-6 landing site. These findings indicate that Mg-suite magmatism was a global and nearly synchronous event, potentially driven by rapid global mantle overturn.

Vernier microcombs for integrated optical atomic clocks

Kerr microcombs have drawn substantial interest as mass-manufacturable, compact alternatives to bulk frequency combs. This could enable the deployment of many comb-reliant applications previously confined to laboratories. Particularly enticing is the prospect of microcombs performing optical frequency division in compact optical atomic clocks. Unfortunately, it is difficult to meet the self-referencing requirement of microcombs in these systems owing to the approximately terahertz repetition rates typically required for octave-spanning comb generation. In addition, it is challenging to spectrally engineer a microcomb system to align a comb mode with an atomic clock transition with a sufficient signal-to-noise ratio. Here we adopt a Vernier dual-microcomb scheme for optical frequency division of a stabilized ultranarrow-linewidth continuous-wave laser at 871 nm to an ~235 MHz output frequency. This scheme enables shifting an ultrahigh-frequency (~100 GHz) carrier-envelope offset beat down to frequencies where detection is possible and simultaneously placing a comb line close to the 871 nm laser—tuned so that, if frequency doubled, it would fall close to the clock transition in 171Yb+. Our dual-comb system can potentially combine with an integrated ion trap towards future chip-scale optical atomic clocks.

Dual wavelength Brillouin laser terahertz source stabilized to carbonyl sulfide rotational transition

Optical-based terahertz sources are important for many burgeoning scientific and technological applications. Among such applications is precision spectroscopy of molecules, which exhibit rotational transitions at terahertz frequencies. Stemming from precision spectroscopy is frequency discrimination (a core technology in atomic clocks) and stabilization of terahertz sources. Because many molecular species exist in the gas phase at room temperature, their transitions are prime candidates for practical terahertz frequency references. We demonstrate the stabilization of a low phase-noise, dual-wavelength Brillouin laser (DWBL) terahertz oscillator to a rotational transition of carbonyl sulfide (OCS). We achieve an instability of (1.2times 1{0}^{-12}/sqrt{tau }), where τ is the averaging time in seconds. The signal-to-noise ratio and intermodulation limitations of the experiment are also discussed. We thus demonstrate a highly stable and spectrally pure terahertz frequency source. Our presented architecture will likely benefit metrology, spectroscopy, precision terahertz studies, and beyond.

Periodically poled aluminum scandium nitride bulk acoustic wave resonators and filters for communications in the 6G era

Bulk Acoustic Wave (BAW) filters find applications in radio frequency (RF) communication systems for Wi-Fi, 3G, 4G, and 5G networks. In the beyond-5G (potential 6G) era, high-frequency bands (>8 GHz) are expected to require resonators with high-quality factor (Q) and electromechanical coupling (({k}_{t}^{2})) to form filters with low insertion loss and high selectivity. However, both the Q and ({k}_{t}^{2}) of resonator devices formed in traditional uniform polarization piezoelectric films of aluminum nitride (AlN) and aluminum scandium nitride (AlScN) decrease when scaled beyond 8 GHz. In this work, we utilized 4-layer AlScN periodically poled piezoelectric films (P3F) to construct high-frequency (~17–18 GHz) resonators and filters. The resonator performance is studied over a range of device geometries, with the best resonator achieving a ({k}_{t}^{2}) of 11.8% and a ({Q}_{{rm {p}}}) of 236.6 at the parallel resonance frequency (({f}_{{rm {p}}})) of 17.9 GHz. These resulting figures-of-merit are (({{{rm {FoM}}}}_{1}={{k}_{t}^{2}Q}_{{rm {p}}}) and ({{{rm {FoM}}}}_{2}={f}_{{rm {p}}}{{{rm {FoM}}}}_{1}{times }{10}^{-9})) 27.9 and 500, respectively. These and the ({k}_{t}^{2}) are significantly higher than previously reported AlN/AlScN-based resonators operating at similar frequencies. Fabricated 3-element and 6-element filters formed from these resonators demonstrated low insertion losses (IL) of 1.86 and 3.25 dB, and −3 dB bandwidths (BW) of 680 MHz (fractional BW of 3.9%) and 590 MHz (fractional BW of 3.3%) at a ~17.4 GHz center frequency. The 3-element and 6-element filters achieved excellent linearity with in-band input third-order intercept point (IIP3) values of +36 and +40 dBm, respectively, which are significantly higher than previously reported acoustic filters operating at similar frequencies.

Responses

Your email address will not be published. Required fields are marked *