Optical readout of a superconducting qubit using a piezo-optomechanical transducer
Related Articles
All-optical superconducting qubit readout
The rapid development of superconducting quantum hardware is expected to run into substantial restrictions on scalability because error correction in a cryogenic environment has stringent input–output requirements. Classical data centres rely on fibre-optic interconnects to remove similar networking bottlenecks. In the same spirit, ultracold electro-optic links have been proposed and used to generate qubit control signals, or to replace cryogenic readout electronics. So far, these approaches have suffered from either low efficiency, low bandwidth or additional noise. Here we realize radio-over-fibre qubit readout at millikelvin temperatures. We use one device to simultaneously perform upconversion and downconversion between microwave and optical frequencies and so do not require any active or passive cryogenic microwave equipment. We demonstrate all-optical single-shot readout in a circulator-free readout scheme. Importantly, we do not observe any direct radiation impact on the qubit state, despite the absence of shielding elements. This compatibility between superconducting circuits and telecom-wavelength light is not only a prerequisite to establish modular quantum networks, but it is also relevant for multiplexed readout of superconducting photon detectors and classical superconducting logic.
Optical sorting: past, present and future
Optical sorting combines optical tweezers with diverse techniques, including optical spectrum, artificial intelligence (AI) and immunoassay, to endow unprecedented capabilities in particle sorting. In comparison to other methods such as microfluidics, acoustics and electrophoresis, optical sorting offers appreciable advantages in nanoscale precision, high resolution, non-invasiveness, and is becoming increasingly indispensable in fields of biophysics, chemistry, and materials science. This review aims to offer a comprehensive overview of the history, development, and perspectives of various optical sorting techniques, categorised as passive and active sorting methods. To begin, we elucidate the fundamental physics and attributes of both conventional and exotic optical forces. We then explore sorting capabilities of active optical sorting, which fuses optical tweezers with a diversity of techniques, including Raman spectroscopy and machine learning. Afterwards, we reveal the essential roles played by deterministic light fields, configured with lens systems or metasurfaces, in the passive sorting of particles based on their varying sizes and shapes, sorting resolutions and speeds. We conclude with our vision of the most promising and futuristic directions, including AI-facilitated ultrafast and bio-morphology-selective sorting. It can be envisioned that optical sorting will inevitably become a revolutionary tool in scientific research and practical biomedical applications.
Flexible micromachined ultrasound transducers (MUTs) for biomedical applications
The use of bulk piezoelectric transducer arrays in medical imaging is a well-established technology that operates based on thickness mode piezoelectric vibration. Meanwhile, advancements in fabrication techniques have led to the emergence of micromachined alternatives, namely, piezoelectric micromachined ultrasound transducer (PMUT) and capacitive micromachined ultrasound transducer (CMUT). These devices operate in flexural mode using piezoelectric thin films and electrostatic forces, respectively. In addition, the development of flexible ultrasound transducers based on these principles has opened up new possibilities for biomedical applications, including biomedical imaging, sensing, and stimulation. This review provides a detailed discussion of the need for flexible micromachined ultrasound transducers (MUTs) and potential applications, their specifications, materials, fabrication, and electronics integration. Specifically, the review covers fabrication approaches and compares the performance specifications of flexible PMUTs and CMUTs, including resonance frequency, sensitivity, flexibility, and other relevant factors. Finally, the review concludes with an outlook on the challenges and opportunities associated with the realization of efficient MUTs with high performance and flexibility.
Grover’s algorithm in a four-qubit silicon processor above the fault-tolerant threshold
Spin qubits in silicon are strong contenders for the realization of a practical quantum computer, having demonstrated single- and two-qubit gates with fidelities above the fault-tolerant threshold, and entanglement of three qubits. However, maintaining high-fidelity operations while increasing the qubit count remains challenging and therefore only two-qubit algorithms have been executed. Here we utilize a four-qubit silicon processor with all control fidelities above the fault-tolerant threshold and demonstrate a three-qubit Grover’s search algorithm with a ~95% probability of finding the marked state. Our processor is made of three phosphorus atoms precision-patterned into isotopically pure silicon, which localise one electron. The long coherence times of the qubits enable single-qubit fidelities above 99.9% for all qubits. Moreover, the efficient single-pulse multi-qubit operations enabled by the electron–nuclear hyperfine interaction facilitate controlled-Z gates between all pairs of nuclear spins with fidelities above 99% when using the electron as an ancilla. These control fidelities, combined with high-fidelity non-demolition readout of all nuclear spins, allow the creation of a three-qubit Greenberger–Horne–Zeilinger state with 96.2% fidelity. Looking ahead, coupling neighbouring nuclear spin registers, as the one shown here, via electron–electron exchange may enable larger, fault-tolerant quantum processors.
Scanning vortex microscopy reveals thickness-dependent pinning nano-network in superconducting niobium films
The presence of quantum vortices determines the electromagnetic response of superconducting materials and devices. Controlling the motion of vortices and their pinning on intrinsic and artificial defects is therefore essential for further development of superconducting electronics. Here we take advantage of the attractive force between a magnetic tip of the Magnetic Force Microscope and a single quantum vortex to spatially map the pinning force inside 50–240 nm thick magnetron-sputtered niobium films, widely used in various applications. The revealed pinning nanonetwork is related to the thickness-dependent granular structure of the films as well as to the characteristic microscopic scales of superconductivity. Our approach is general and can be directly applied to other type-II granular superconducting materials and nanodevices.
Responses