Related Articles
State-level policies alone are insufficient to meet the federal food waste reduction goal in the United States
The United States Food Loss and Waste Reduction Goal seeks to reduce national food waste by 50%, down to 74 kg per capita, by 2030. Here we investigate state policies’ alignment with the federal goal across four policy categories. We develop a policy scoring matrix and apply it to wasted food solutions listed in the non-profit ReFED’s database to derive ranges of food waste diversion potential and projected generation across states. On the basis of state policies alone, no state can meet the federal target. We estimated a diversion potential of 5–14 kg per capita and a food waste generation of 149 kg per capita nationally in 2022, equivalent to the 2016 baseline. Without additional intervention at the state and federal level promoting a shift from food waste recycling towards prevention, rescue and repurposing, food generation in the United States will probably remain high.
Flash Joule heating for synthesis, upcycling and remediation
Electric heating methods are being developed and used to electrify industrial applications and lower their carbon emissions. Direct Joule resistive heating is an energy-efficient electric heating technique that has been widely tested at the bench scale and could replace some energy-intensive and carbon-intensive processes. In this Review, we discuss the use of flash Joule heating (FJH) in processes that are traditionally energy-intensive or carbon-intensive. FJH uses pulse current discharge to rapidly heat materials directly to a desired temperature; it has high-temperature capabilities (>3,000 °C), fast heating and cooling rates (>102 °C s−1), short duration (milliseconds to seconds) and high energy efficiency (~100%). Carbon materials and metastable inorganic materials can be synthesized using FJH from virgin materials and waste feedstocks. FJH is also applied in resource recovery (such as from e-waste) and waste upcycling. An emerging application is in environmental remediation, where FJH can be used to rapidly degrade perfluoroalkyl and polyfluoroalkyl substances and to remove or immobilize heavy metals in soil and solid wastes. Life-cycle and technoeconomic analyses suggest that FJH can reduce energy consumption and carbon emissions and be cost-efficient compared with existing methods. Bringing FJH to industrially relevant scales requires further equipment and engineering development.
Surfactant-induced hole concentration enhancement for highly efficient perovskite light-emitting diodes
It is widely acknowledged that constructing small injection barriers for balanced electron and hole injections is essential for light-emitting diodes (LEDs). However, in highly efficient LEDs based on metal halide perovskites, a seemingly large hole injection barrier is usually observed. Here we rationalize this high efficiency through a surfactant-induced effect where the hole concentration at the perovskite surface is enhanced to enable sufficient bimolecular recombination pathways with injected electrons. This effect originates from the additive engineering and is verified by a series of optical and electrical measurements. In addition, surfactant additives that induce an increased hole concentration also significantly improve the luminescence yield, an important parameter for the efficient operation of perovskite LEDs. Our results not only provide rational design rules to fabricate high-efficiency perovskite LEDs but also present new insights to benefit the design of other perovskite optoelectronic devices.
Plastics matter in the food system
Agriculture and food systems are major sources of plastic pollution but they are also vulnerable to their diverse lifecycle impacts. However, this problem is not well-recognized in global policy and scientific discourse, agendas, and monitoring of food systems. The United Nations-led Global Plastics Treaty, which has been under negotiation since 2022, is a critical opportunity to address pollution across the entire plastics lifecycle for more sustainable and resilient food systems. Here, we offer aspirational indicators for future monitoring of food systems’ plastics related to (1) plastic polymers and chemicals, (2) land use, (3) trade and waste, and (4) environmental and human health. We call for interdisciplinary research collaborations to continue improving and harmonising the evidence base necessary to track and trace plastics and plastic chemicals in food systems. We also highlight the need for collaboration across disciplines and sectors to tackle this urgent challenge for biodiversity, climate change, food security and nutrition, health and human rights at a whole systems level.
Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mapping
The integrity of structural materials is oftentimes defined by their resistance against catastrophic failure through dissipative plastic processes at the crack tip, commonly quantified by the J-integral concept. However, to date the experimental stress and strain fields necessary to quantify the J-integral associated with local crack propagation in its original integral form were inaccessible. Here, we present a multi-method nanoscale strain- and stress-mapping surrounding a growing crack tip in two identical miniaturized fracture specimens made from a nanocrystalline FeCrMnNiCo high-entropy alloy. The respective samples were tested in situ in a scanning electron microscope and a synchrotron X-ray nanodiffraction setup, with detailed analyzes of loading states during elastic loading, crack tip blunting and general yielding, corroborated by a detailed elastic-plastic finite element model. This complementary in situ methodology uniquely enabled a detailed quantification of the J-integral along different integration paths from experimental nanoscale stress and strain fields. We find that conventional linear-elastic and elastic-plastic models, typically used to interpret fracture phenomena, have limited applicability at micron to nanoscale distances from propagating cracks. This for the first time unravels a limit to the path-independence of the J-integral, which has significant implications in the development and assessment of modern damage-tolerant materials and microstructures.
Responses